What is a delagate engineer and what are their responsibilties
What is a Delegate Engineer? (Florida descriptions, but other states follow the same or similar requirements) A delegate engineer is a Professional Engineer (PE)
Trex Fencing partners with Engineering Express® to provide design plans, to customers across the US.
Quick Links
Trex Customers Needing Plans For Permit
Trex Fencing Installation Videos
Browse Plans For Permit
Browse & purchase these engineer-certified plans to build your next Trex Fencing project.
These Plans are non-site specific with a range of design options that are signed and sealed in the state of your choosing. Use them in conjunction with a design professional’s site-specific layout to submit for a building permit where applicable. Always check with the local building official before going this route. Click here to request a site-specific drawing or Click to Live Chat. Learn More
Trex: Horizons 6′ Tall Fence And Gate – Horizontal Slats Performance Evaluation
$200.00 – $300.00
or ( 20 Tokens – 30 Tokens )View
Trex: Horizons 6ft Tall Horizontal Rolling Gate – Steel / Aluminum Performance Evaluation
$200.00 – $300.00
or ( 20 Tokens – 30 Tokens )View
Trex: Horizons 8′ Tall Fence and Gate – Horizontal Slats Performance Evaluation
$200.00 – $300.00
or ( 20 Tokens – 30 Tokens )View
Trex: Seclusions 12′ Tall Composite Fence – Vertical Slats Performance Evaluation
$200.00 – $300.00
or ( 20 Tokens – 30 Tokens )View
Trex: Seclusions 6ft Tall Vertical Rolling Gate – Steel / Aluminum Performance Evaluation
$20.00 – $300.00
or ( 20 Tokens – 30 Tokens )View
Trex: Seclusions 8′ Tall Composite Fence and Gate – Vertical Slats Performance Evaluation
$200.00 – $300.00
or ( 20 Tokens – 30 Tokens )View
Help Center
What is the process to renew a Miami Dade NOA I have?
Introduction A Miami-Dade NOA (notice of acceptance) renewal is required to extend the NOA expiration date another 5 years beyond its current expiration date. To
Whats the difference between the Miami Dade NOA Quality Assurance Date and the Building Code Expiration Date?
Learn How To Quickly Spot And Use QA Expiration & Code Dates On a Miami Dade NOA Why This Is So Important Miami Dade Lists
*** Find More Help With Product Approvals Here ***
Find more general help with Florida & Miami-Dade Product Approvals by visiting the support articles of EngineeringPlans.com. SEARCH PRODUCT APPROVALS Smart Search All Florida &
What’s the difference between ground and roof snow load for patio covers?
When designing outdoor structures like patio covers, one of the most critical factors to consider is the ability to support snow loads. In regions that
Performance Limitations for Mechanical Equipment & TER Certifications
Summary of Building Code & Research Intent The intent & provisions of the 2018 International Building Code (IBC), 2018 International Residential Code (IRC) & 2020
Sunroom Terminology
The following is a summary of sunroom-related terms provided courtesy of the National Sunroom Association. Click Here for the official publication provided by the
Door and Hardware Online Glossary
Thanks to our partners at ASSA ABLOY, we’re happy to pass along this helpful glossary of industry lingo. Learn all about the many terms used
ASCE 7 WIND EXPOSURE CATEGORIES AND HOW EXPOSURE ‘D’ WORKS
Wind Exposure Category Overview ASCE-7 is the governing referenced standard for design loads on buildings & other structures for building codes throughout the US. ASCE
Search our AC model Database
Click Here to access our model database tool. You can filter by your AC brand, model, and number to find the TER report you need
I see values for F1 and F2 on Evaluation Reports. What are they?
F1 and F2 are the limiting performance capacities of the forces in the parallel and perpendicular directions of a building component. Which one is which
Learn About Rooftop & Ground Wind Forces for Mechanical Units
Want to learn how to design AC units on stands or curbs for wind design? Are you looking for tools to help in in design?
About Door Product Pressure Ratings and Water Infiltration
QUESTION: Why do certain door products rate a certain p.s.f like -60/+60 then lower ratings are shown throughout the product approval? Usually, the higher
What are The Span Limitations of Large Missile Impact Doors – Windows – Shutters?
A Frequent question is what are the span, height, pressure, and installation limitations for large & small missile impact products. The following takes into consideration
Requirements of Substituting Glass Panels In Insulating Glass Systems
ASTM 1996-17 Regarding Glass Substitution Section A1.8 states: “A1.8.1.1 The impact resisting lite (monolithic or laminated) of an insulating glass unit shall be composed of
Requirements of Substituting Insulated Glass Spacers in Glazed Products
ASTM 1996-17 Regarding Insulated Glass Spacers. This 2017 standard added section A1.9.2 stating tested air spacers making up the insulated laminated unit can be substituted
Loss of Capacity Due To Welded Aluminum In Railings – Signs – Structures
Regarding any aluminum railing project, it is imperative to understand the life-safety issue that arises when welding an aluminum railing or sign post. For example,
What’s the difference between aluminum T5 and T6 temper (like 6063-T5 vs 6063-T6 alloy)?
How do you get from a T5 to T6 temper? Heat treatment is done by raising the alloy temperature to about 980 degrees F and
Understanding Canopies: Design and Load Considerations
A canopy is an overhead structure that offers protection from weather elements like rain, snow, and sunlight. Canopies can come in various types and configurations,
The Updated Saffir-Simpson Scale
First, it needs to be said that there is a complicated formula that converts wind velocity to wind pressure. Many wind pressure values can exist
How to Avoid Contact With Aluminum & Dissimilar Metals
This is provided to inform clients of the dissimilar metal protection requirements of the 2015 Aluminum Design Manual, Chapter M – Section M.7 Structures of
Why are spacing, edge distance, and embedment important for concrete anchors?
When an anchor is installed into concrete, there is an area surrounding the anchor called a cone of influence in which the anchor is affecting
How To Determine Uplift Reactions For Canopies-Carports-Pergolas
Canopies & Wind Understand this – A backyard canopy attached to the back of your house, a pergola/trellis, or a lightweight sunroom/screen room comprise
Is Steel or Reinforcing or Fibermesh Required in Posts & Footings of Building Components?
INTRODUCTION The main purpose foundations serve is to distribute and resist the forces or loads experienced by the host structure due to wind, rain, snow,
ASCE 7 Main Wind Force vs. Components & Cladding Explained (MWFRS vs. C&C)
ASCE 7 separates wind loading into three types: Main Wind Force Resisting System (MWFRS), Components and Cladding (C&C), and Other Structures and Building Appurtenances. MWFRS