Performance Limitations for Mechanical Equipment & TER Certifications
Summary of Building Code & Research Intent The intent & provisions of the 2018 International Building Code (IBC), 2018 International Residential Code (IRC) & 2020
OZCO BUILDING PRODUCTS
ENGINEERING SUPPORT CHANNEL
Ozco partners with Engineering Express to provide engineering designs
& certifications of OZCO building products & custom plans.
Ozco Contractors Needing Custom Engineering Designs:
Have a question about an OZCO product or want to purchase one?
Call them directly at (469) 916-7503 or email them at [email protected]
Quick Links
Browse & Purchase Certified Engineering Evaluation Reports For Permitting
Purchase sealed performance evaluation reports to submit with your OZCO products for high wind, snow, and other loading structural performance certifications needed for permit throughout the US
These Plans are non-site specific with a range of design options that are signed and sealed in the state of your choosing. Use them in conjunction with a design professional’s site-specific layout to submit for a building permit where applicable. Always check with the local building official before going this route. If in question Contact Us To discuss a site-specific drawing or Click to Live Chat. Learn More
Hillman Group: 10 x 10 POST BASE KIT (Item No. 51705) (10×10-PB-IW) & (10×10-PB-LS)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 2PK Timber Bolt 1/2″ x 1.5″ – 4″ (Item No. 56694)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 2PK Timber Bolt 1/2″ x 10″ -12″ (Item No. 56698)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 2PK Timber Bolt 1/2″ x 4″ – 6″ (Item No. 56695)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 2PK Timber Bolt 1/2″ x 6″ – 8″(Item No. 56696)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 2PK Timber Bolt 1/2″ x 8″ -10″ (Item No. 56697)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 2PK Timber Bolt 3/4″ x 1.5″ – 4″ (Item No. 56673)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 4 x 4 Column Cap (Item No. 56678 And 51778)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 4” Post To Beam Connector (Item No. 51775)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 4×6 Post Base Connector (Item No. 56604)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 6 x 6 Column Cap (Item No. 56679 And 51779)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 6″ Beam Hanger – Item No. 51714 (6-BH-IW) And 57714 (6-BH-LS)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: 8in Post To Beam Flush Connector (Item No. 51776)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: Truss Base Fan 10:12 Plate (item no. 56620)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: Truss Base Fan 12:12 Plate (item no. 56644)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: Truss Base Fan 3 Point Only Plate (Item No. 56646)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: Truss Base Fan 8:12 Plate (item no. 56619)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Hillman Group: Truss Base Fan T-Plate (Item No. 56645)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
OZCO: 2″ High Velocity Rafter Clips Items #’s 51738 And 56638
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
OZCO: 6-8″ Joist Hanger Tab Item #’s 56639, 56640, 51739, And 51740
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
OZCO: 8 x 8 Lite Post Base Kit Item #’s 52109 And 54209
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
OZCO: 8-10″ Joist Hanger Flush Item 51770 (JHF-810-IW)
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
OZCO: OWT Timber Screws Item #’s 56625 to 56629; 56647, And 56648
$60.00 – $80.00
or ( 6 Tokens - 8 Tokens )View
Help Center
About Impact Requirements & Mechanical Equipment in the Florida Building Code & Essential Facilities
Mechanical Equipment – Impact or Not Impact? Questions frequently arise as to what the rule is in Florida, Miami, and the HVHZ zone (Dade and
Pros and Cons of Obtaining a Florida Statewide Approval Vs A Miami Dade Approval and how a TER fits in
Two common means of product evaluations in Florida are Florida Statewide Approvals (FSA’s) and Miami-Dade Notices of Acceptance (NOA’s). To help determine whether these evaluations
I see values for F1 and F2 on Evaluation Reports. What are they?
F1 and F2 are the limiting performance capacities of the forces in the parallel and perpendicular directions of a building component. Which one is which
What are The Span Limitations of Large Missile Impact Doors – Windows – Shutters?
A Frequent question is what are the span, height, pressure, and installation limitations for large & small missile impact products. The following takes into consideration
Technical Evaluation Report – TER – Types of Product Evaluations Typically Performed By Engineering Express
Engineering Express provides structural design evaluations of various types of mechanical equipment exposed to weather. There are four (4) evaluation types typically performed, each with
Florida Statewide Approvals (FSA) – Quality Assurance and Validator Requirements
About Validators & Quality Assurance Compliance It is often asked of us to explain the validator and quality assurance requirements of the Florida Statewide Product
Master Plan Sheet – Product Evaluation – TER Explained
What is a Master Plan Sheet – Product Evaluation & TER? A master plan, also known as a product evaluation or TER (Technical Evaluation Report)
PRODUCT APPROVALS ARE NOT ALWAYS REQUIRED! HERE’S WHY:
Here Are 3 Myths About Product Approval Requirements Background Product evaluations (sometimes called “product approvals”, “ICC reports”, NOA’s or similar) for building products are general
Case Study: Phantom Screens – Is a Florida Product Approval Required?
Product Approvals for building components are the general rule in Florida. Building officials, architects, insurance companies, even homeowners ask for them all the time, frequently
Can a Building Inspector or Plan Reviewer Deny The Use of a TER or Master Plan Sheet?
DENIED – YES OR NO? While plan reviewers, inspectors, and other building officials have the authority to question any document submitted if the document complies
Florida Product Approval and Miami Dade NOA Requirements
WHEN IS A FLORIDA PRODUCT APPROVAL OR MIAMI DADE NOA REQUIRED & HOW TER’S AND PERFORMANCE EVALUATIONS FIT IN FIRST, A WORD ABOUT FLORIDA PRODUCT
What do I do if a TER or Master Plan isn’t enough for a permit?
THE BUILDING DEPARTMENT WON’T ACCEPT MY TECHNICAL EVALUATION REPORT (TER)? Sometimes, municipalities or contract documents require more information than just submitting a TER (Technical Evaluation
How do I get a Certified TER or Master Plan Sheet?
FIRST, WHAT’S A CERTIFIED TER & Master Plan Sheet? TER’s or Technical Evaluation Reports and Master Plan Sheets must bear the original signature and raised
What doesn’t a TER or Master Plan Sheet do?
FIRST, WHAT IS A TER? TER’s or Technical Evaluation Reports are evaluations of a product’s performance. They are not intended to approve products for a
What is a TER and how is it used for permitting?
A TER or Technical Evaluation Report, is an engineering evaluation based on testing and/or rational analysis for the performance of a building product or component.